What is the basic process flow of webbing weaving?

At present, there are many webbing companies in the country, and there are many webbing factories and traders in various places. The most concentrated places are Guangzhou, Dongguan, Quanzhou, Yiwu, Wenzhou, etc. Because of the different advantages of different places, the prices are different. Guangzhou has In China Textile City, the ribbon manufacturers are concentrated all over the country, and the grades are uneven. Quanzhou is a mid-range nationwide, and some of them have high-end ribbons. Due to the concentration of national import and export trade, the advantages of raw materials, labor, and other aspects, the grades are also uneven. The process flow includes:

Order (green fabric) warping, sizing, self-joining, weaving, embryo inspection, finished product embryo, order (dyed) warping, dyed yarn, sizing, drawing-in machine, weaving embryo inspection through:

The one-step process of converting raw yarn (cheese yarn) into beam (beam) through the creel, divided into three types of sizing: raw yarn warping, colored yarn finishing and partial warping: Beam or dyed after sizing warping The beam (warp beam) is hung on the creel of the sizing machine, and passes through the sizing liquid in the sizing tank → the cylinder for drying → the creel is layered → integrated into the woven beam.

Main function: Compress the cilia of the original yarn by the sizing liquid, so that the cilia will not stick to the cotton ball due to friction on the loom; Weaving warp stopper: one of the induction devices to prevent warp yarn from breaking, and the induction can be completed by cooperating with the warp stop rod.

Heald: one of the equipments to change the weave pattern of the weaving, it can complete the change of the weave pattern by cooperating with the peach pan and lifting heald of the loom.

Reed: weaving can be done in accordance with the input of the weft and the change of the heald

Machine: The act of hanging the threaded shaft yarn on the loom through the carriage of the locomotive.

Self-joining: The beam after sizing does not need to be drawn through and is directly completed by the action of the knotting machine, and the result is the same as on the machine.

Weaving: Put the threaded shaft yarn on the loom to match the input of the weft and the operation of the loom to complete the weaving action.

Embryo inspection: After weaving, the embryo inspector will complete the inspection according to CNS inspection standards to understand the quality of the fabric after weaving, and to facilitate the dyeing function of the embryo.